☰

Business ideas for metal processing. "how I opened a metal structures workshop." Purchase of metalworking equipment as part of a business plan

Five profitable directions for business in metalworking:

Modern business related to metalworking.

In modern economic conditions, the metalworking business is gaining very high momentum and has the highest development prospects. This is due, first of all, to the fact that our life cannot do without metal products. Starting from simple repairs that require bolts, screws and nails, to large-scale construction projects.

Metalworking technology is a process of transforming the shape of metals, their properties and qualities. There are various special equipment and machines available for this conversion. Accordingly, for different metalworking technologies, different machines and equipment will be needed, and, accordingly, different rooms in which such equipment will be located. It is also necessary to take into account the availability of the necessary labor resources and alternative sources of electricity. These factors will also significantly influence the choice of business area related to metalworking.

In modern conditions, metalworking technologies are:
- casting;
- welding;
- various mechanical processing;
- metal processing under pressure.

In order to understand what type of metalworking you can do, you need to know what these technologies are.

Casting technology is the process of pouring molten metal into special and pre-prepared molds. Products or objects that are obtained using this technology are called castings. This is a very complex and expensive technology, and the business itself using this technology requires very large financial investments. The casting production process itself is very complex, and each type of metal has its own technology. For example, the production of castings from non-ferrous metals requires special electric furnaces and other special equipment. Ferrous metals, blast furnaces, which are expensive to maintain and very expensive. The casting market belongs to large corporations, so it is not very feasible for an ordinary businessman.

Welding technology involves the connection of individual metal elements and parts to give the overall integrity of any structure that is made of metal. Such a connection is achieved by using various types of welding, such as gas, electric, and so-called soldering welding. This technology is not very expensive, and anyone who has certain skills and the necessary equipment can start this business.

The technology of various mechanical processing of metal involves surface treatment of a metal workpiece. This includes drilling, cutting, grinding, and other mechanical processing. This technology uses various turning, drilling and milling equipment. Depending on the type of machining planned, investments in such a business can range from the low to medium ranges.
The next technology is metal forming. During pressure treatment, the metal is deformed and takes on the required shape without returning to its original state.

Pressure processing involves forging, stamping, drawing and other technologies that can deform and modify a metal workpiece. A business associated with such technology also requires certain financial costs, but very significant ones, therefore it is also suitable for an ordinary person who decides to engage in this metalworking technology.

As stated earlier, the most cost-effective and expedient business in the field of metalworking is welding, various machining and metal processing under pressure. Metal processing by casting is very expensive and labor-intensive. In general, it should be noted that 60% of the total metal processing market is occupied by mechanical processing. The following equipment is used for mechanical processing.

The main share of mechanical processing of various metals goes to turning using various machines, for which various lathes are provided.

This processing means various cutting of metal, trimming it, various boring and grinding.

The following machines are provided for this purpose:
1. Turret machines. They are intended for processing bar metal. Their design includes a special head into which various special cutting attachments are mounted, such as drills, reamers, cutters and countersinks.

2. Turning and screw-cutting machines. These machines are designed for cutting various threads on parts or workpieces. This is done by increasing or decreasing the rotation speed. The accuracy of threads in these machines depends on the speed.

3. Frontal and rotary metalworking machines. Such machines are used to produce various flywheels and various gears. From the practice of using these machines it follows that they have rather low processing accuracy. Therefore they are very rarely used. Basically, such machines are replaced by automatic or semi-automatic lathes, controlled not by a person, but by a program.

The next type of machine is milling machines.

Such machines are designed for various processing of external and internal surfaces of parts and various workpieces. They are also used for cutting out various channels and grooves in parts. The milling cutter in these machines is mounted in a special spindle, which rotates and processes workpieces or parts. Such machines come in the following modifications.

1. Universal milling machine. It is used for processing various surfaces of light and medium-sized parts. In such a machine, the table itself moves, it moves at different angles relative to its axis.

2. Horizontal milling machine. Its difference from the universal one is that its table can only move along the horizon of the spindle axis.

3. Widely versatile milling machine, differs from the two described above by an additional spindle head. This allows, in parallel with milling, additional processing by drilling or boring the part.

4. The vertical cantilever milling machine has a vertical spindle, which greatly enhances its technical ability and various capabilities.

5. Longitudinal milling machine, designed for processing very large parts or workpieces. It allows for the installation of four spindles simultaneously.

6. Jig boring machine, designed for processing various parts and workpieces with extreme precision, and processing various complex elements. A characteristic feature of such a machine is the ability to drill, countersink and turn parts.

Another type of machine is grinding machines.

Such machines are used to smooth and level the surface of various parts or workpieces. There are the following types of grinding machines.
1. Centerless grinding machines. These machines are used for processing various parts that do not have internal holes, as well as relatively long parts of not very large size.

2. Cylindrical grinding machines are used for various grinding of discontinuous external and smooth surfaces.

3. Surface grinding machines have found their application for circular and longitudinal grinding of parts. A special grinding wheel rotates in it.

4. Specialized grinding machines are made to create workpieces of a certain specified shape.

There are also machines that cut metal blanks to create high-precision products. These are so-called band saw machines. On such machines, corners are created, pipes, metal circles and squares are cut.

As in every business, there are several promising areas in metalworking. In order to highlight them, it is necessary to analyze the metalworking market and the development of consumer demand for certain metal products. Having analyzed supply and demand, we can come to the conclusion that at this time there are five promising areas in this business.


And of course - Roll forming lines.

For the production of materials for the arrangement of walls, roofs and the construction of fences, entire lines can be used that are installed in the workshop. Most Popular Product Lines - since there are usually no problems with the sale of products. All corrugated sheets obtained in production must comply with GOST. This profile fits perfectly when covering hipped roofs, with virtually no waste. The most popular line for the production of corrugated sheets is C8. This corrugated sheet is used for any fencing and cladding of horizontal and vertical surfaces (walls, fences). C10 corrugated sheeting is no less in demand.

The most popular tile is Monterey. Such roofing can be found in different parts of our country. There are promising new metal tiles “Adamante” and “Finera”, which are gradually crowding out “Monterrey”.

Each such metal profile requires a separate line. But some lines allow the production of 2 types of products: metal tiles and corrugated sheets. For example, the line for the production of metal tiles “Cascade” rolls both metal tiles and C20/25 corrugated sheets.

The line consists of a coil unwinder, a roll forming machine, a shear, a receiving device and an automatic control system.

Unwinder - used to unwind a metal roll and feed it to a rolling mill, where a corrugated sheet is formed. The receiving table serves as a storage unit for stacking sheets for further packaging. The line is controlled by the operator using an automatic control system. Usually 2 people are enough to work on the line.

Video - Line for the production of metal tiles:

The first direction is metalworking, associated with the production of various screws, nuts, bolts, and self-tapping screws. These products are in constant demand, as they are used in various repairs, construction and other service industries. Analysis of the development of the market for specific services, such as repair work, finishing and construction work, as well as furniture production, allows us to say that this type of metalworking product is developing quite dynamically. The equipment that can be used to develop this business is not very expensive compared to other metalworking industries.

On the modern market for such equipment, there is both used and new equipment. New equipment is presented in a wide range, ranging from domestic to high-quality foreign.

To engage in such activities you will need turning equipment.
Everyone knows that machines designed for these types of metalworking come in two types. The first type is machines with software, the so-called CNC machines, and machines without software; accordingly, their prices vary. The most expensive machines of this type start from 100,000 euros, domestic machines of this type start from 1,000,000 rubles. The cheapest machines, of course, have already been used, and they can be bought as scrap metal. Then repair it.

The second promising area of ​​metalworking is carrying out various welding and gas-cutting operations. Much can be said about the prospects for the development of this business, but it is also necessary to analyze the industries where this type of metalworking is most in demand. First of all, this is during construction and repair work. Let's look at each segment separately. In the modern construction business, there is such a thing as performing work under a contract and subcontract.

Its essence is that a company that wants to build a multi-story building may not have high-quality builders, but may attract various contractors. Among these contractors, the most in demand are masons and people who know how to handle welding equipment. Therefore, not a single construction site can do without highly qualified welders and carvers. In addition, a lot of welding work is also required when carrying out small construction and repair work in private construction.

The next segment is carrying out various repair and installation work. Such work is required both in the small household sector and in the large industrial sector. Everyone knows that at large facilities, such as power plants, factories, major repairs of equipment and various premises periodically occur. When carrying out a major overhaul, old equipment is dismantled, followed by the installation of new, or the installation of old but repaired equipment. Many large customers do not have such specialists on staff, so for such work various contractors are hired, whose staff must include welders and metal cutters. This segment is also characterized by the fact that the work is paid at a very high cost.

Equipment for such a metalworking business is not very expensive compared to lathes. The list of such equipment includes various welding and plasma cutting machines, special tables with various functions, and, of course, combined machines that combine the functions of turning and welding functions. The equipment is presented by both domestic and foreign manufacturers. By and large, the cost of the equipment will depend on the specific functions and power. Used equipment is also present on this market.

The cheapest equipment is domestic and Chinese equipment. Foreign analogues from world leaders are, of course, much more expensive. The pricing policy will range from 20,000 rubles for a simple welding machine, to 50,000 euros for complex equipment that can perform various functions, ranging from simple welding to turning and grinding of welded parts. If we talk about average investments in order to start this type of business, then we must first of all take into account the direction of such a business. After all, you can do simple welding and get money for 1 centimeter of weld, or you can manufacture individual parts that will need to not only be welded, but also ground.

The third promising direction is the production of specific rolled products. Over the past 10 years, products made from various aluminum profiles have been in great demand. Let's take, for example, the production of metal-plastic windows. They are made from aluminum profiles that have a special coating. In addition, various fittings and mosquito nets are made for such windows. There are other types of rolled products that are also successful. This is the production of aluminum profiles for construction. This type of business is developed quite well in our country. Since the demand for his products is constantly growing.

In Russia, new houses are being built, in old houses and apartments, the owners are trying to replace outdated wooden windows with the latest metal-plastic ones. In addition, this business segment includes the production of wire and small pipes. According to the latest developments in various thermal systems for private heating, copper and metal-plastic pipes are very successful in terms of heat transfer. Therefore, the prospect of business development related to the processing of metal in the form of rolled metal does not slow down, but on the contrary, it will increase over time.

Of course, equipment for such a business is relatively expensive, but with a good marketing approach, you can count on its quick payback. The equipment market for this business is represented by a very large assortment of equipment and its manufacturers. This is, first of all, domestic and imported equipment. The pricing policy for such equipment remains at a consistently high level. This is probably due, first of all, to the profitability of such a business, and to the high technical requirements for the quality of the products produced.

The list of such equipment is very long and, first of all, depends on the type of product that will be produced. First of all, these are various rolling lines, lines on which corrugated sheets are produced, and special band saw equipment designed for cutting metal. Specific equipment designed for unwinding sheet metal rolls, for winding wire, for the production of wire and products from it (nails, etc.).

The price of such equipment, as indicated above, will depend on the application. Of course, the cost may vary, but you can invest 2,000,000 rubles. For this price, you can equip just one production facility, for example, corrugated sheets or aluminum profiles. For a full range of works with metal rolling, you will need from 2,000,000 to 12,000,000 rubles.

The fourth type of activity, which is of great relevance, is the production of some metal products, for example parts and other types of turning products. In terms of profitability and profitability, it is a very profitable production, but again, the cost of the equipment is quite high. Such products are primarily relevant in the automotive market, as well as the market for various parts and accessories for doors, windows, furniture, and other carpentry.

Everyone knows that since 2010, the income of the population has increased significantly, so the demand for various household items and carpentry began to grow. It is clear that a workshop for the production of furniture, or for the production of profiles for windows, will not have special equipment for the production of various accessories. It is profitable to purchase such accessories from other suppliers. Therefore, this type of business is promising in terms of further development. Equipment for such a business is not significantly expensive, and used machines can be purchased for its development.

The equipment market for this type of activity is replete with various offers, ranging from old Soviet lathes to the latest imported machines, with all kinds of functions, and software equipment. As mentioned above, turning equipment is expensive, but an average machine with various functions can be bought for 100,000 euros or 1,000,000 rubles.

The last area that deserves special attention is flawless metal processing by pressure. This area includes all kinds of forging and the production of parts under pressure. Forged products are in great demand nowadays. These are not only skillful fences and various barriers, but also household items.

With the development of various shops and other retail outlets, cafes and restaurants, forging products are very popular. First of all, they emphasize the status of the institution and its financial situation. Forging items are various fences, household items, fences and gates, lampposts. Under the press you can also make various blanks and rolled products (pipes and other products). In order to start this business, first of all, it is necessary to highlight in which direction the entrepreneur will work. If this is forging, then you will need a special furnace and tools that will give the heated metal a certain shape. If an entrepreneur decides to choose a direction related to metal processing with a press, then it will be necessary to purchase a multifunctional press. It should also be noted that modern forging comes in two types, cold and hot.

The equipment is presented by different manufacturers, and accordingly the pricing policy is different. The main equipment is bending machines, various presses, heating furnaces and special tools. Equipment for cold forging costs between 15,000 euros and 6,000 euros. It all depends on the manufacturer of such equipment. You can practice forging in the old way, heating the metal in a furnace and shaping it using metalworking tools. The cost of presses can range from 60,000 rubles to 400,000 rubles.

Having summed up the main areas of business related to metalworking, it should be noted that each type of such business is very profitable, but you can engage in a complex of these areas, and thus immediately respond to the emerging demand for metalworking. The only disadvantage that can affect the development of this business is the significant price of equipment and the constantly changing demand for products. Since the demand for direct depends on the income of the population. It is also necessary to note significant competition. The density of various metalworking workshops is very high.
Having considered all the pros and cons of this metalworking business, it is necessary to analyze how to properly open such a business.

First of all, you need to know that if you position yourself from the point of view of a manufacturer, you will have to open an LLC and pay a significant amount of taxes. Therefore, it is better to simply become an individual entrepreneur.

In order to open a metalworking shop, the following factors must be taken into account. The first factor is, first of all, the premises. When choosing a room, you need to pay attention to the presence of ventilation, proper electrical wiring, and a fire alarm in the workshop.

When opening a workshop where all this is faulty, it will not be possible to work, for the reason that the regulatory authorities in the form of the fire inspection and sanitary service simply will not give permission. The next factor is the recruitment of personnel to work on such professional equipment. Employees must have certain qualifications, which must be confirmed by special documents (diploma, certificate of rank assignment). This is primarily necessary to prevent various work-related injuries and disputes with regulatory authorities.

Before you can decide on costs and profits, you need to develop a marketing strategy. Such a strategy will be based primarily on the need for a particular type of metalworking in the area where such a workshop is opening. No need to save on advertising. Advertising is very important in such a business. In addition, it is necessary to have very detailed information about potential buyers of such products. For example, when running a business related to forging, you need to have information about all the elite stores, retail spaces, and people who can pay for high-quality forged products. Owners of rich residential real estate. When producing profiles and various products, you need to pay attention to the presence of various companies that provide services for machine repair, construction work and installation work.

If the business is connected with turning work, then you need to look for enterprises that will purchase turning products. In addition, you need to pay attention to the Internet. These are, first of all, various Internet pages of companies. On such pages you can send commercial proposals, with samples of work, and also search for sites on which various enterprises organize tender purchases of works and parts. You can even try to create your own online store, but this must be done if there is a wide range of products. Products such as self-tapping screws, bolts, nuts, various building profiles. Can be sold to various hardware stores. But we must not forget about the availability of relevant state certificates.

So, to sum it all up, it is necessary to determine what investments will be needed to open such a business. It should be noted right away that the exact investment will depend on the choice of business. Therefore, we will take the average value. Taking into account the purchase of equipment and rental of a workshop, you will need to have 2,000,000 - 15,000,000 rubles. In addition, it is necessary to take into account the number of workers and their salaries. This is an individual value and depends on the desires of the businessman.

In order to calculate the payback of a metal processing shop, it is also necessary to take the average value of all similar metal processing shops. So, if we proceed from the calculation of prices for certain types of metal products (raw materials), as well as the cost of final products, taking into account the resources expended, we can come to the conclusion that the payback for an average workshop will be 1 year. It is clear that this is all approximately. In modern business, there is such a thing as business planning. This is done by special companies, whose staff includes various economists and analysts working in various areas of business.

Of course, each workshop and related equipment may change its cost. A striking example is the recent fall of the ruble on the currency exchange, which forces each manufacturer to dramatically change price tags not only for equipment and raw materials, but also for products. Therefore, to have complete information about the return on investment, a competent business plan can provide up to one day. You also need to take into account that some entrepreneurs take out a loan from a bank, and these are different calculations and a different return on investment.

Summarizing all of the above, we can confidently say that the metalworking business has a very profitable commercial component, but also certain difficulties associated with taxation and specific legislation. This business requires serious investments and an aggressive marketing policy. Only an ideal combination of these two components can lead to the success of this business and its further development.

New Business Ideas




Metalworking is a wide range of processes for the formation of individual units, elements, structures and products. Metal processing methods can be divided into: cutting, joining, forming. In this case, the following operations are used: cladding, heat treatment and thermal spraying, anti-corrosion treatment, chopping and cutting, turning, milling and plastic processing on machines, grinding, creating holes, hardening, applying decorative coatings.

The company Uralosnastka LLC offers all types of metalworking. Modern metalworking shop produces products with a perfectly smooth surface and dimensions adjusted to within a fraction of a millimeter. CNC machines and innovative technologies make it possible to produce such delicate work. The high-tech metalworking industry has opened up new opportunities for businesses at all levels these days. To obtain high-quality products that meet the high demands of today, it is necessary metalworking shop with a complex of modern machines.

One of the most important materials discovered by man is metal. Today there is not a single field of activity where alloy products are not present. Mechanical engineering, medicine, chemical and construction industries, light and food industries, nuclear energy, aviation and space technology... The list of industries where metal-processed parts are used can be continued endlessly. That is why metal processing is a profitable, but very responsible business. And the process itself is labor-intensive, high-tech, requiring ultra-precise, expensive equipment.

Metalworking shop equipment

Our metalworking shop equipped with the latest technology. At 1500 sq.m. squares are located:

  • pressing machines;
  • machines for milling and turning with program control;
  • drilling machines;
  • punching presses
  • press brakes;
  • electroerosive installations
  • automatic lathes;
  • furnaces for heat treatment of metal;

We carry out work of any complexity; if necessary, we develop technical documentation and drawings for the manufacture of parts.

Metalworking services

Metalworking shop our company - well-established, modern production. Metal processing is carried out by experienced, highly qualified specialists with special technical education. We provide high-quality services for the manufacture and repair of products, fixtures and tools. Types of work performed:

  • flame, laser, waterjet cutting;
  • stamping;
  • milling and turning works;
  • powder coating;
  • welding work.

Metalworking:

  • correction of defects on workpieces;
  • metal marking;
  • cutting metals with mechanized or hand tools;
  • manual cutting;
  • manual filing;
  • thread cutting;
  • obtaining chamfers, conical and cylindrical recesses, holes.

Plasma cutting is carried out on CNC machines, which makes it possible to minimize metal losses and make extremely accurate cutting of workpieces. Turning is necessary for the manufacture of parts that are bodies of rotation - disks, shafts, couplings, flanges, etc. Milling allows you to obtain an image on the surface of a metal of any complexity. It is most often used for decorative processing of metal products, for example, for making plates with images and raised letters.

The laser cutting machine ensures the most accurate cutting of sheet metals. Press brakes have a “bending process simulation” function. Punching presses are used for the manufacture of perforated products. At the request of the customer, perforation of sheets can be made with decorative holes, at any pitch.

Benefits of working with us

Our clients choose our metalworking shop, since we are a full-cycle enterprise. Our equipment allows us to produce serial products in a fairly short time. Our customers appreciate that we have:

  • The manufactured products have high quality characteristics.
  • Design and metalworking of custom-made products is carried out even according to the client’s verbal description.
  • Thanks to our own equipment, the price of products is optimal.
  • The order is delivered strictly within the specified time frame.

Contact us and we will produce for you molds, punches, dies of various sizes, flanges for the oil and gas industry, dies, hardware and other types of products that fully comply with European quality standards.

Unfortunately, in our country there are not yet many types of private business and they can be divided into three categories:

  • Opening a retail outlet (shop, stall, etc.).
  • Offer of services (hairdressing salon, catering establishments, responsible storage of goods, and so on).
  • Production of goods (carpentry or metalworking workshop, tailoring studio, etc.).

The success of the first two categories of private business is characterized by both dependence on many factors (seasonality of demand, the need to maintain many contacts with suppliers, many sanitary and hygienic and regulatory acts that regulate the work of small companies, and so on), and extremely intense competition in the market.

In the manufacturing sector, starting a private manufacturing enterprise is somewhat easier and often cheaper. In the material below, prepared by our team, we will talk about opening our own turning workshop.

Who will be the client of your turning workshop?

Turning products are in great demand not only among the general population, but also among other private entrepreneurs. Your potential clients will be:

  • Construction or finishing teams.
  • Car service stations.
  • Repair shops.
  • Small private enterprises that do not have turners on staff, but have a periodic need for turning products, for example, carpentry workshops.
  • Resellers of hardware in the market of your locality, owners of construction, household or auto parts stores, as well as other entrepreneurs working in the trade sector.
  • Private individuals.

As you can see, you won’t have to suffer from a lack of clientele. This is due to the fact that it is simply not profitable for large turning shops to take on a one-time small order, since the cost of one product will “skyrocket” or the lead time for the order will increase enormously due to the fact that it will be completed in the interval between batches of wholesale customers . Industrial enterprises will not even consider applications from such clients.

Finding a location for a turning workshop

Since at the beginning of your business activity you will have to work with one-time clients who need single products, you should take special care in choosing the premises. This could be your garage in a garage cooperative, a container at the market, non-residential premises in a residential area or near a car service center, and so on.

The advantages of such premises are the possibility of free advertising and the presence of a “ready” base of potential clients. However, some difficulties may arise. For example, when renting non-residential premises in a house, you will have to take care of having a separate entrance from the street or isolating it from the rest of the owners’ property.

The room must be connected to a water supply and drainage system, as well as an electrical network with a voltage of at least 220 V. This will be quite sufficient for the operation of a desktop lathe and ensuring the sanitary and hygienic standards required by law.

Estimated costs to get started

The main amount of expenses required to open a turning workshop is needed to purchase technological equipment. It is quite natural that the newer the machines and the more functions they have, the higher their cost. The minimum set to get started is as follows:

  • Tabletop lathe – 50,000 – 60,000 rubles.
  • Grinding machine – 9,000 – 10,000 rubles.

You will also have to take care of purchasing cutting and sharpening tools, as well as the availability of rolled metal for the first time (rods of several standard sizes made of steel of three to five grades).

After your enterprise has become somewhat stronger, you will be able, based on existing demand, to purchase other equipment necessary to expand the range of manufactured parts. For example, a high-frequency furnace will allow you to perform basic heat treatment of turned products (hardening, tempering, and so on).

Hiring

If you do not have professional turner skills, then finding the right specialist can be difficult. This is due both to the lack of professionals in the labor market due to the decline in the prestige of blue-collar professions, and because of the bad habits that the candidate will have.

To make it easier to find a turner, we recommend paying attention to young people whose professional experience is at least three years, and no more than one and a half to two years have passed since their dismissal. To facilitate the dismissal of a candidate who is not suitable based on professional or personal data, it is better to conclude an employment contract for a period of one to three months.

Professional minimum requirements:

  • Rank no less than third.
  • Ability to sharpen cutting tools.
  • Knowledge of lathe design and capabilities.

It is better to hire a turner who worked in a tool shop or repair service. In terms of his professional skills, such a third-class turner is significantly superior to a candidate with a fifth category who worked “on the program,” that is, on an automatic lathe.

Modern metal processing consists of a range of technologies for the production of parts for the production of household appliances, industrial products, tools, etc. The demand for metalworking is growing year after year, so owning your own business in this area is a very profitable business.

Where to begin

1. In order to start your own business, you need to decide on its direction. Modern metal processing methods are divided into two groups:

  • mechanical;
  • chemical.

The first group is the most suitable for organizing your own business: everything related to chemistry entails large costs for organizing waste disposal, preliminary cleaning of ventilation emissions and problems with obtaining permits for doing business. Start your own business

The first group includes:

  • stamping;
  • mechanical processing on metal-cutting machines.

2. Having chosen the direction of activity, you should decide what equipment you will have to buy and what it is better to make on your own.

At the same time, we should not forget that, unlike trade, in production the paramount importance is not advertising, but the introduction of advanced technologies characterized by high productivity. It is in this case that the products will have low costs, and therefore competitiveness.

3. At the first stage, you can take orders for metalworking: the demand for such work never falls. Custom metal processing will require a small machine park and a small guillotine. If you are an experienced machine operator, you can purchase used equipment and restore it. This could be, for example, equipment for. You can also buy new machines: now many equipment manufacturers have appreciated the benefits of producing machines for small businesses. So entrepreneurs have a choice.

Many entrepreneurs start a metalworking business with only a set of tools. After some time, they begin to expand their business, purchasing machines and other equipment that allows them to reduce the cost of their products.

4. Renting premises. The area of ​​the room depends on the initial set of equipment. If you cannot immediately rent a large premises with the prospect of expanding production, you will only need to rent an area of ​​at least 30 m2. Otherwise, it will simply be inconvenient for you to work.

5. Advertising. Despite the fact that your business is not a trade, you still cannot do without good advertising. In order to quickly recoup your investment, you need to “show your face” to your potential customers. Place advertisements on all sites known to you, post a video. Don't neglect placing advertisements in newspapers.

Expansion of production

If you have successfully completed the first stage, returned your money invested in production and accumulated capital for further expansion of production, then the next step in your activity will be the acquisition of equipment in accordance with your chosen direction.

  • Metal cutting processing. The most effective is rotary metal processing. Many operations are performed on rotary lathes:
  1. processing of internal and external cylindrical surfaces;
  2. conical and shaped surfaces;
  3. drilling central holes;
  4. deployment;
  5. countersinking;
  6. turning ring grooves;
  7. trimming ends and cutting.

With the help of special devices, these machines can perform grinding and milling, as well as many other operations.

But this applies to bodies of rotation. When manufacturing parts with a rectangular cross-section, the required surface finish of the metal is achieved by grinding. Therefore, you should have surface grinding in your machine park. And, of course, you will need a machine.

Ultrasonic processing of metals is better suited for polishing surfaces. This method allows you to process tool and structural steels, non-ferrous metals without the use of pastes, felts and abrasives.

Gear gear requires special equipment. To make a gearbox gear, you will have to purchase a gear hobbing machine.

  • Stamping. Stamping equipment (crank and hydraulic presses) is quite bulky. In small businesses, presses with a force of up to 16 Tf are most often used. But if you decide to use high-performance equipment in your production, then magnetic pulse metal processing is suitable for you.

The magnetic pulse installation allows you to perform almost all types of stamping operations: cutting, punching, distribution, etc. Manufacturing equipment for this type of stamping is less labor-intensive, and productivity is higher than on mechanical presses.

There is one more expense item that you simply must provide for: the cost of special literature. The Metalworking Handbook should become your reference book.

Regarding the welding business, we can say the following: this type of work is in great demand, and starting it is much easier than a metalworking business. To do this, you need to choose the right equipment (by far the most popular is a switching inverter). You can start your own metal welding business in the garage.

Currently, large, medium and small businesses are developing at a rapid pace. The most common and in demand are the service sector, trade and farming. The service sector needs to be highlighted separately. A current idea is to organize metal processing services. Today, metal is one of the most common materials. It is widely used in construction and industry. A very promising business would be to open your own metal processing shop. It should be noted that this idea will require certain capital investments.

Metalworking is a fairly broad concept. It can be based on technological processes used in industry, or decorative. In any case, organizing such a business will require a lot of effort. Metal parts and products are in great demand; when producing them, you can hand over the goods to various private organizations or stores. The advantage of such a business is that selling the goods will not be difficult. Let's take a closer look at the business plan. Metalworking: how registration is carried out, collecting documentation, where to buy equipment - these are the issues that he must take into account.

Return to contents

Registration and collection of necessary papers

To start your own metalworking business, the first thing you need to do is draw up an accurate business plan, which should include choosing the location of the future enterprise, registration, collecting documents, purchasing equipment and tools, establishing a customer base, determining basic expenses and income, selling products . First, a new entrepreneur must decide on a location. In addition, it is important to know exactly what you want to open: a small workshop or a workshop where metalworking will be carried out. Then, after you have a legal address, you need to register as an individual entrepreneur or LLC with the tax office.

In this case, you need to pay a state fee. The first registration option is the simplest; it will help save time and money. But it has one big drawback: in this case it will not be possible to carry out transactions with legal entities, that is, various companies and organizations, only with individuals. In addition, you will need to collect the necessary documents: permission from territorial property management, a conclusion from Rospotrebnadzor authorities on the right to carry out this activity, permission from the fire inspection. If the premises are rented, then the latter is the responsibility of the lessor.

Return to contents

Equipment for cold artistic forging and profile bending

Metalworking is more relevant to medium or small businesses. The business plan involves artistic forging of metal and bending of various profiles and pipes.

Artistic forging is used mainly in private construction in the manufacture of window grilles, furniture, fences, fences.

In this case, the cold forging method is used. Such metalworking will require the purchase of equipment with which it will be possible to produce coins, arcs, peaks, arches, rings and other small decorative items. Its advantage is that it is very compact (takes up little space) and more convenient to use.


The most popular among this equipment is the cold forging machine "Azhur-2", the cost of which is more than 250 thousand rubles. It is made in Russia. There are also foreign-made machines, for example, Chinese. They cost a little cheaper, about 210 thousand rubles. A business plan may also include a technological process such as profile bending. Pipe benders are used for these purposes. They can be manual or electric. They are used for the manufacture and processing of pipes, channels, rods, strips and so on. Such metalworking will require equipment. The most commonly used device for these purposes is the "Azhur-6" device. It costs approximately 170 thousand rubles. In addition to all of the above, you will need a large number of tools and machines. You can purchase them at any specialized store.

Return to contents

Profitability, main expenses and income

The business plan must include calculation of total expenses and income, since success will depend on this. Metalworking is a rather difficult task. Her business plan should include renting premises, which will cost several tens of thousands per month. Costs will largely be associated with the purchase of equipment. It will cost about a million rubles, it all depends on the size of the enterprise. The smaller it is, the lower the costs. Part of the money will go to pay wages to workers. Metalworking is largely automated labor, and the more machines there are in an enterprise, the fewer workers will be required.